|
Mitsubishi Galant1990-2001 of releaseRepair and car operation |
|
Mitsubishi Galant + Identification numbers of the car + Controls + Options and routine maintenance + The engine + Cooling and heating systems + The power supply system and release + Engine electric equipment + Control systems of the engine + Manual transmission + Coupling and transmission a line + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
Identification numbers of the car Process of continuous improvement of let out production is distinctive line of any line production. Thus, except for cases of large constructive changes of models descending from the conveyor, results of process of updating in the car operation manual are not shined. However the manufacturer makes out number lists of let out spare parts in view of what special value at purchase of the last is got by the information coded in identification numbers of the car. Doing the order for a demanded spare detail, try to give to the seller fuller information on the car. Necessarily inform the model name, year of release, and also number of a body and the power unit.Identification numbers of the car Identification number of the engine Identification number of transmission The code of type of transmission is beaten out on fixed on a back partition of an impellent compartment information nameplate (see above). Identification number of transmission is engraved on the inflow formed in the top part of a forward wall картера of a transmission. Identification number of the leading bridge (only models Galant AWD) The bridge code is engraved on the inflow formed on crankcase of differential. Identification number of a distributing box (only models Galant AWD) To distributing box the separate code is not appropriated. (AWD) number of a distributing box is located on all-wheel drive models on crankcase transmissions. Information label of systems of decrease in toxicity (VECI) Label VECI contains the information on an arrangement of components of systems of decrease in toxicity of the fulfilled gases, specifications parametres on adjustment of separate knots and is used together with шильдой on which the scheme of a lining of vacuum hoses is put. Labels usually fasten from a cowl underside. In case of loss of the information or its divergence with equipment actually established on the car the new label always can be ordered in the service-centre of the company-manufacturer of the car. Where: MFI = System of the distributed (multiitem) injection SOHC = the Engine with one camshaft located from above DOHC = the Engine with two camshafts located from above * The engine/letter code, taking of 8th position in structure VIN ** The letter taking of 10th position in structure VIN |
|