Mitsubishi Galant

1990-2001 of release

Repair and car operation

https://www.sexfeast.ru С†РµРЅС‹ РЅР° РіРµР»СЊ РіРµР»СЊ Р»СѓР±СЂРёРєР°РЅС‚ С†РµРЅР°.

Removal, installation and adjustment of position of lateral doors

Details of installation of lateral doors on models Mirage on 1992 вып.


1 — a threshold Overlay 2 — Lateral обтекатель 3 — a threshold Overlay 4 — the Decorative overlay of a door pillar 5 — the Contact socket of electroconducting 6 — Подпружиненный a pin 7 — Door assemblage	8 — the Top loop 9 — the Bottom loop 10 — the Terminator of opening of a door 11 — the Drummer 12 — the Adjusting overlay of the drummer 13 — the Cap of the gauge-switch of a door 14 — the door Gauge-switch

Details of installation of lateral doors on models Galant 1994 ч 1998 of вып.


1 — the Contact socket of electroconducting 2 — Подпружиненный a pin 3 — Door assemblage 4 — the Top loop 5 — the Bottom loop	6 — the Terminator of opening of a door 7 — the Drummer 8 — the Adjusting overlay of the drummer 9 — the Cap of the gauge-switch of a door 10 — the door Gauge-switch

Details of installation of lateral doors on models Diamante since 1997 вып.


1 — the Contact socket of electroconducting 2 — the Cover of the terminator of opening of a door 3 — the Bolt 4 — Door assemblage 5 — the Top loop 6 — the Bottom loop	7 — the Terminator of opening of a door 8 — the Drummer 9 — the Adjusting overlay of the drummer 10 — the Cap of the gauge-switch of a door 11 — the door Gauge-switch

Procedure is identical both for lobbies, and for back lateral doors of the car.

Removal

PERFORMANCE ORDER

1. Details of installation of door assemblages are shown on illustrations.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Open a door and prop up it тележечным a jack, - for protection of a paint and varnish covering, lay between a head of a jack and door edge wooden брусок.
4. Turn out bolts of fastening of the terminator of opening of a door.
5. Release the carving plug and disconnect a plait of the main plait of electroconducting of a door. Disunite other contact sockets of door assemblage.
6. Mark position of loopy laths of a door.
7. Turn out loopy bolts and accurately remove door assemblage, - take advantage of the help of the assistant.

Installation

PERFORMANCE ORDER

1. By means of the assistant establish a door on the regular place, prop up its jack and by hand tighten bolts of loopy laths.
2. Level loopy laths according to the landing labels put in the course of dismantle, then tighten fixing bolts with demanded effort (17 ч 26 H•м: for models Galant on 1993 вып. And Mirage on 1992 вып., 22 H•м: for models Diamante, Galant since 1994 вып. And Mirage 1993 ч 1999 of вып. And 27 H•м: for models Mirage since 1997 вып.).
3. Restore initial connection of electroconducting.
4. Establish the terminator of opening of a door and strongly tighten bolts of its fastening.
5. Clean a jack propping up a door.
6. Connect a negative wire to the battery.

Adjustment

PERFORMANCE ORDER

1. Define, bolts what of loopy laths are necessary for releasing for door displacement in a demanded direction.
2. Release bolts, having provided freedom of moving of door assemblage.
3. Correct a door in кузовном an aperture and again tighten fixing bolts with demanded effort.
4. Continue procedure performance until the door will not occupy demanded position in кузовном an aperture.
5. Check up serviceability of operation of a latch of the lock of a door.
6. In case of need release bolts of fastening of a plate of the drummer and rotation of the last achieve serviceable operation of a latch.
7. Tighten fixing bolts with demanded effort (12 H•м).