Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of position of lateral doors
   Removal, installation and adjustment of position of a cowl
   Removal, installation and adjustment of position of a door of a back (model Хэтчбэк and the Versatile person)
   Removal, installation and adjustment of position of a cover of a luggage space (model the Sedan)
   Removal and installation of door rear-view mirrors
   Replacement of the aerial of a radio receiver
   Removal and installation of forward wings
   Removal and installation of the panel of devices
   Removal and installation of the central console
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of the external handle of a door and elements of a drive of a latch of the lock
   Removal and installation of the cylinder of the lock of a lateral door
   Removal and installation of the cylinder of the lock of a door of a back/cover of a luggage space
   Removal and installation of the handle of a door of a back
   Removal and installation of door glass and regulator стеклоподъемника
   Removal and installation of the electromotor of a drive стеклоподъемника
   Replacement салонного rear-view mirrors
   Removal and installation of seats
   Removal and installation of the electromotor of a drive of a seat
+ Onboard electric equipment





Removal and installation of forward wings

Details of installation of a forward wing on models Diamante 1992 1996 of вып.

1 — Локер protection of a wheel arch
2 — the Index of turn/parkovochnyj fire
3 — the Forward wing

4 — the Sealant
5 — the Insulator


Details of installation of a forward wing on models Diamante since 1997 вып.

1 — Локер protection of a wheel arch

2 — the Wing


Details of installation of a forward wing on models Galant on 1993 of вып.


Details of installation of a forward wing on models Galant 1994 1998 of вып.

1 — Гравийная protection
2 — Локер protection of a wheel arch
3 — Радиаторная a lattice
4 — the turn Index
5 — Assemblage of a head headlight

6 — the Panel передка
7 — the Forward wing
8 — Молдинг lateral protection
9 — the Insulator


Details of installation of a forward wing on models Galant since 1999 вып.

1 — Гравийная protection

2 — Локер protection of a wheel arch


Details of installation of a forward wing on models Mirage on 1992 вып.

1 — Радиаторная a lattice
2 — Локер protection of a wheel arch
3 — the Aerial (the right wing)
4 — Молдинг lateral protection

5 — the Combined lantern
6 — the Panel of furnish of a lattice
7 — the Forward bumper
8 — the Wing


Details of installation of a forward wing on models Mirage since 1993 вып.

1 — Локер protection of a wheel arch
2 — the turn Index
3 — the Ornament

4 — the Wing
5 — the Assembly arm


Models Diamante 1992 1996 of вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Diamante 1992 1996 of вып. Are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove forward грязеотбойник.
5. Remove молдинг lateral protection.
6. Remove forward lateral обтекатель.
7. Release clamps and remove локер protection of a wheel arch.
8. Remove assemblage of the index of turn/parkovochnogo of fire.
9. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8625. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Diamante since 1997 вып.

Removal


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
3. Remove a forward bumper.
4. Remove forward lateral обтекатель.
5. Release fixture and remove локер protection of a wheel arch.
6. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8625. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Galant on 1993 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Galant on 1993 вып. Are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove wing facing.
5. Remove молдинг lateral protection.
6. Release clamps and remove локер protection of a wheel arch.
7. Remove a forward bumper.
8. Remove assemblage of the index of turn / combined fire.
9. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8625. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Galant 1994 1998 of вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Galant 1994 1998 of вып. Are shown on from an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove гравийную protection.
5. Release clamps and remove локер protection of a wheel arch.
6. Remove радиаторную a lattice.
7. Remove assemblage of the index of turn.
8. Remove assemblage of a head headlight.
9. Remove the panel передка.
10. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8531 or 8646. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Galant since 1999 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Galant since 1999 вып. Are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove гравийную protection.
5. Remove a forward bumper.
6. Remove assemblage of a head headlight.
7. Remove a lateral overlay of a wing.
8. Remove гравийную protection.
9. Release clamps and remove локер protection of a wheel arch.
10. Remove an arm демпфера a cowl.
11. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8625. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Mirage on 1992 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Mirage on 1992 вып. Are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove радиаторную a lattice.
5. Release clamps and remove локер protection of a wheel arch.
6. Remove assemblage of the aerial of a radio receiver.
7. Remove молдинг lateral protection.
8. Remove assemblage of a head headlight.
9. Remove the panel of furnish of a lattice.
10. Remove a forward bumper.
11. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8625. Track, that fixing bolts have been tightened with demanded effort (6 H•м).


Models Mirage since 1993 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on models Mirage since 1993 вып. Are shown on an illustration.
2. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding forward wheel.
4. Remove a forward bumper.
5. Release clamps and remove локер protection of a wheel arch.
6. Remove assemblage of the index of turn.
7. Remove a wing ornament.
8. Turn out located along the top, bottom and back edges covered fixing bolts and remove the panel covered from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before wing installation by type hermetic 3М ATD № 8531 or № 8646. Track, that fixing bolts have been tightened with demanded effort (6 H•м).