Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
- Manual transmission
+ 5-step manual box of a gear change (РКПП)
+ Automatic transmissions (АТ)
+ Distributing box
+ Coupling and transmission a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
Access exclusive content and early releases on 123movies.
Manual transmission
| 5-step manual box of a gear change | |
| The general parametres | |
Transmission type | 5-step transmission of type F5М21, F5М22 or F5М31
|
Volume трансмиссионного oils | See the Head of Adjustment and routine maintenance
|
Adjustment parametres | |
Axial люфт differential boxes, mm | 0.05 ÷ 0.17
|
Differential pretightness, mm | 0.05 ÷ 0.10
|
Люфт gearings of satellites, mm | 0.025 ÷ 0.150 (in both parties)
|
Axial люфт bearings of a primary shaft, mm | |
| 0.010 ÷ 0.120
|
| 0.00 ÷ 0.09
|
Axial люфт the bearing of an intermediate gear wheel, mm | |
All boxes, except F5М31 | 0.010 ÷ 0.140
|
РКПП F5М31 | 0.010 ÷ 0.110
|
Pretightness of an intermediate shaft, mm | 0.05 ÷ 0.10
|
Pretightness of a secondary shaft, mm | 0.05 ÷ 0.10
|
Efforts of a tightening of carving connections H•м | |
Bolts of fastening of the lever of switching to the case | 9 ÷ 14
|
Directing choice and switching cables | 9 ÷ 14
|
Fastening bolt муфты a speedometer drive | 27 ÷ 44
|
The gauge-switch of fires of a backing | 30 ÷ 35
|
Drain stopper | 30 ÷ 34
|
Jellied stopper | 30 ÷ 35
|
Bolts of fastening РКПП to the engine | |
| 43 ÷ 55
|
| 48
|
| 43 ÷ 55
|
| 48
|
Bolts of fastening РКПП | |
Bolts of 12 mm | 43 ÷ 53
|
Bolts of 10 mm | 30 ÷ 35
|
Bolts 6 ÷ 8 mm | |
Bolts of fastening of a dome of coupling | 8 ÷ 10
|
Bottom coupling bolt РКПП | 30 ÷ 35
|
Bolt of the holder of the bearing | 16 ÷ 22
|
Bolt of a leading gear wheel of differential | 130 ÷ 140
|
Counternut of a primary shaft | 140 ÷ 160
|
Counternut of an intermediate shaft | 140 ÷ 160
|
Bolt of a plate of a clamp | 20 ÷ 27
|
Nut of a finger of a spherical support of the bottom lever of a suspension bracket | 60 ÷ 72
|
Bolts of a back cover | 15 ÷ 22
|
Bolt of an axis of an intermediate gear wheel of a reverse gear | 15 ÷ 22
|
Bolt lock скобы | 15 ÷ 22
|
Bolts of fastening of an arm of a support of a suspension bracket to картеру РКПП | 60 ÷ 80
10 ÷ 12 |
Nuts of a support of a suspension bracket | 48
|
Through bolt of a support of a suspension bracket | 69
|
Automatic transmission | |
The general parametres | |
Type АТ | 3-step transmission of series F3А21, or 4-step series F4А20/30/50
|
Volume ATF | See the Head of Adjustment and routine maintenance
|
Operation card муфт coupling and brake tapes | |
Position of the lever of the selector | Working elements АТ
|
Position “D” | |
| Back and one-pass муфты couplings
|
| Back муфта couplings and a brake tape of a drive kickdown
|
| Lobby, back and торцевая* муфты couplings
|
| Face муфта couplings and a brake tape of a mode kickdown
|
Position “2” | |
1st transfer | Back and one-pass муфты couplings
|
2nd transfer | Back муфта couplings and a brake tape of a drive kickdown
|
Position “1” (“L”) | |
1st transfer | Back муфта couplings and brake assemblage of lowering transfers/backspacing
|
Position “R” | Lobby муфта couplings and brake assemblage of lowering transfers/backspacing
|
Positions "N" and “Р” | All elements are disconnected, or involved with the minimum efficiency
|
Stall-test turns | |
Transmission | Turns, rpm
|
3-step (F3А21) | 1000 ÷ 2200
|
4-step (series F4А20/30/50) | |
| 2100 ÷ 2600
|
| 2500 ÷ 3000
|
Efforts of a tightening of carving connections H•м | |
Gauge-switch PNP | |
Models Mirage on 1997 вып. And Galant on 1993 вып. | 10 ÷ 12
|
Models Mirage since 1998 вып. And Galant since 1994 вып. | 11
|
Models Diamante | 10 ÷ 12
|
Drain stopper | 30 ÷ 34
|
Jellied stopper | 30 ÷ 34
|
Nut of fastening of a cable of a drive throttle заслонки | 10 ÷ 14
|
Bolts of fastening of the converter of transmission | 46 ÷ 53
|
Bolts of the holder of the bearing | 17 ÷ 22
|
Bolts of fastening of a dome of the converter of rotation | 19 ÷ 23
|
Bolts of fastening of a leading gear wheel of differential | 130 ÷ 140
|
Fastening bolts приводного a disk to the rotation converter | 46 ÷ 53
|
Bolts of fastening of a lock plate of an axis of an intermediate gear wheel | 47 ÷ 58
|
Nut of a manual control lever | 17 ÷ 22
|
Bolts of the oil pump | 15 ÷ 20
|
Fastening of the holder of planetary transfer to one-pass муфте | 35 ÷ 45
|
Emphasis bolt распорного a rod | 20 ÷ 27
|
Counternut of a distributing shaft | 200 ÷ 230
|
Bolts of fastening of a cover face муфты couplings | 6 ÷ 8
|
The adjusting screw of an operating regulator | 8 ÷ 10
|
Bolt of fastening of gauge-switch PNP | 8 ÷ 10
|
The adjusting screw of a manual control lever | 8 ÷ 10
|
Bolts of fastening of the oil filter | 5 ÷ 7
|
Bolts of fastening of the pallet картера | 10 ÷ 12
|
Bolts of fastening of pulse generators | 10 ÷ 12
|
Bolt of fastening of a support of a jet shaft to the case of the oil pump | 10 ÷ 1 2
|
Fastening bolts клапанной assemblages | 4 ÷ 6
|
Fastening bolts клапанной assemblages to картеру transmissions | 10 ÷ 12
|
Bolts of fastening of transmission to the engine | |
| 75
|
| 43 ÷ 55
|
| 48
|
| 43 ÷ 55
|
| 48
|
The moments of switching АТ
АТ F3A21 (Mirage)AT F4A20 (Mirage)
AT F4A22 (Galant)
AT F4A23 (Galant)
Adjusting parametres
Card of pressure for 3-step transmissions (series F3А20)Card of pressure for 4-step transmissions (series F3А20/30/50)
- 10 кПа or more low; · pressure is generated, but non-standard value; SW the switch of raising transfer
The scheme of distribution of pressure of an operating regulator
