Mitsubishi Galant

1. Open a cowl and prop up its persistent rod

2. A marker lead round the loopy laths fixed on a cowl.

3. Disconnect from built in in a cowl snuffled washing wind has flown down ла plastic tubes.

4. Disconnect corresponding electroconducting.

5. Turn out bolts of fastening of a cowl to loopy laths, - ask to adhere the assistant back edge of a cowl.

6. Accurately liberate a persistent rod and remove a cowl.

1. Cautiously get a cowl on the regular place and by hand tighten loopy bolts. At once prop up a cowl a persistent rod.
2. Achieve combination of loopy laths with the landing labels put in the course of dismantle, then strongly tighten fixing bolts.
3. Restore initial connection of electroconducting and tubes of washers of a windscreen.
4. Check up correctness of installation of a cowl in кузовном an aperture, in case of need make corresponding updating (see more low).

1. Close a cowl and check up correctness of its position in кузовном an aperture. In case of need again open a cover and make necessary adjustment by easing of fixture of loopy laths and their displacement in a corresponding direction. Having finished adjustment, again strongly tighten fixing bolts.
2. Check up serviceability of operation of a latch of the lock of a cowl. In case of need ослабьте bolts of fastening of a latch and in appropriate way correct position of last concerning the drummer.
3. Make sure, that the cowl in the closed position settles down заподлицо with surfaces surrounding кузовных panels. In case of need adjust position of a rubber emphasis by their rotation.