Mitsubishi Galant

1. Details of installation of forward seats are shown on й to an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. If, at a corresponding complete set of the car, refusal приводного the electromotor takes place, the seat is necessary for shifting manually for the purpose of providing of access to fixture elements. Release fastening bolts приводной boxes by the left and right ends of directing runners. Remove a power shaft on the left side and delay a box to the right on itself., then disconnect transfer from a lateral runner. Manually shift a seat so that access to fixture elements has opened.
4. Remove decorative covers анкерных bolts.
5. At a corresponding complete set disconnect corresponding electroconducting.
6. Give fixing bolts/nuts, remove a seat and take it from car salon.

1. Establish a seat on the regular place, - track correctness of blocking of regulators from both parties of a seat.
2. At first temporarily tighten forward fixing nuts, then - back bolts.
3. In the same order definitively tighten fixture with demanded effort (30 H•м: nuts and 44 H•м: bolts).
4. Establish decorative covers анкерных bolts.
5. At a corresponding complete set restore initial connection of electroconducting.
6. Connect a negative wire to the battery.

Establish a pillow on the regular place and densely press. Make sure of reliability of fixing of a pillow lock скобами.

1. Remove a pillow of a back seat (see above).

2. Release fixing bolts/nuts, remove a corresponding back of a back seat and take it from car salon.

1. Establish a back on the regular place and tighten fixing bolts/nuts with demanded effort (22 H•м).
2. Establish into place a seat pillow.