Mitsubishi Galant

1990-2001 of release

Repair and car operation

Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission a line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Electric sockets - the general data
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns/alarm systems
   Removal and installation подрулевых the combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of a direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and a problem diagnostics
   System of additional safety (SRS) - the general information and safety measures
   Removal and radio tape recorder/CD-player installation
   Removal and CD-changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections

Replacement of measuring instruments of a combination of devices

Removal

PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Remove a combination of devices (see Has undressed Removal and installation of a combination of devices).
3. Turn out fixing screws and remove from assemblage a combination a cover with protective glasses.

4. Turn out fixing screws and remove a measuring instrument requiring replacement / a control lamp.

Installation

PERFORMANCE ORDER

1. Establish a replaceable measuring instrument / a control lamp on the printed-circuit board of a combination of devices. Screw and tighten fixing screws.
2. Establish into place a cover with protective glasses.
3. Establish a combination (see Has undressed Removal and installation of a combination of devices).
4. In summary connect a negative wire to the battery and check up serviceability of functioning of all measuring instruments of an instrument guard.