Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission a line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Electric sockets - the general data
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns/alarm systems
   Removal and installation подрулевых the combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of a direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and a problem diagnostics
   System of additional safety (SRS) - the general information and safety measures
   Removal and radio tape recorder/CD-player installation
   Removal and CD-changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections




Removal and installation of loudspeakers

Details of installation of forward loudspeakers

1 — the Loudspeaker

2 — the Contact socket


Details of installation door ВЧ динамиков

1 — the Decorative overlay
2 — ВЧ динамик
3 — the Panel of an internal upholstery of a door
4 — the Decorative lattice

5 — the Cover
6 — the Loudspeaker
7 — the Assembly arm of a loudspeaker


Details of typical installation of back loudspeakers

1 — the Decorative lattice
2 — the Loudspeaker

3 — the Back shelf


Forward loudspeakers

Removal

 PERFORMANCE ORDER

1. Forward loudspeakers are built in from above in the panel of devices of the car. Details of installation of forward loudspeakers are shown on an accompanying illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Remove a decorative lattice of a forward loudspeaker.
4. Release clamps, disconnect electroconducting and take a loudspeaker from the panel of devices. Operate extremely cautiously, - try not to damage a membrane dynamics.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.


Door loudspeakers

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Remove the panel of an internal upholstery of a door (the Body see the Head).

3. Turn out fixing screws, liberate a loudspeaker from the landing nest in a doorframe and disconnect from it electroconducting. Operate extremely cautiously, - try not to damage a membrane dynamics.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.


Door high-frequency dynamics

Removal

 PERFORMANCE ORDER

1. Details of installation ВЧ door dynamics are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Turn out fixing screws
4. Liberate динамик from a landing nest and disconnect from it electroconducting.


Installation

 PERFORMANCE ORDER

Installation is made upside-down


Back loudspeakers

Removal

 PERFORMANCE ORDER

1. Back loudspeakers are usually mounted on a back shelf of salon, details of their installation are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Remove a decorative lattice of a loudspeaker.
4. Turn out fixing screws.
5. Liberate a loudspeaker from a landing aperture in a back shelf.
6. Disconnect electroconducting and remove a loudspeaker.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.