Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
- Options and routine maintenance
   The schedule of routine maintenance of cars Mitsubishi Galant/Mirage/Diamante
   Specifications
   The general data on options and adjustments
   Check of levels of liquids
   Check of a condition of tyres and pressure of their rating
   Replacement of impellent oil and the oil filter
   Check, service and gymnastics of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement ATF of automatic transmission and differential of the main transfer, check of a condition and filter AT service
   Check of a condition of brake lines
   Check of a condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of backlashes of valves - only Mirage
   Replacement of a filtering element of an air cleaner
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation картера (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement приводных belts
   Check of a condition of components of system of release of the fulfilled gases
   Replacement трансмиссионного oils РКПП
   Replacement of greasing of a distributing box - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check of a condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of the power supply system
   Check of a condition and replacement of a belt (it) of drive ГРМ
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Replacement of a filtering element of an air cleaner

Replacement of a filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the filter condition should be checked often enough, in particular in the conditions of strongly dusty district.

All models, except 2.0 l equipped with the engine with a turbo-supercharging

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!


2. Release clamps of fastening of a cover of an air cleaner.

3. Ослабьте a collar of fastening of an air sleeve on the throttle case.

4. Disconnect from an air inlet a ventilating branch pipe.

5. Disconnect electroconducting from the gauge of measurement of weight of air (MAF).

6. Separate a cover of an air cleaner from the case and remove it in gathering with a final air line.

7. Take from the air cleaner case filtering element.

8. Visually estimate a condition of a filtering element, in case of strong pollution make replacement. Filter moderately hammered by a dust it is possible to blow compressed air (through a back surface).

At use of compressed air necessarily put on goggles! The filtering element made of a wax paper cannot be washed out with application of oils or solvents if to achieve satisfactory result by a purge it is not possible, make replacement.

In order to avoid premature deterioration of internal components of the engine and occurrence of flashes in a final path do not maintain the car with the taken air filter!

9. Carefully wipe internal surfaces of the case and an air cleaner cover.
10. Establish a replaceable filtering element, track correctness of its planting in a casing.
11. Plant into place an air cleaner cover.
12. Connect a final air line to the case of a throttle and strongly tighten a fixing collar.
13. Connect electroconducting to gauge MAF.
14. Latch clamps of fastening of a cover of an air cleaner.
15. Connect a negative wire to the battery.


Models 2.0 of l with a turbo-supercharging

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!


2. The scheme of connection of components of an inlet air path is presented on an illustration.

3. Disconnect electroconducting from the gauge of measurement of an air stream (under the volume expense).
4. Release fixture of a hose of system of pressurisation.
5. Disconnect the electromagnetic valve in gathering with the hoses brought to it.
6. Release bolts of fastening of an air cleaner.
7. Release clamps and remove an air cleaner cover.

Try not to damage the gauge of measurement of an air stream fixed on a cover!

8. Take filtering element.
9. Visually estimate a condition of a filtering element, in case of strong pollution make replacement. Filter moderately hammered by a dust it is possible to blow compressed air (through a back surface).

At use of compressed air necessarily put on goggles! The filtering element made of a wax paper cannot be washed out with application of oils or solvents if to achieve satisfactory result by a purge it is not possible, make replacement.

In order to avoid premature deterioration of internal components of the engine and occurrence of flashes in a final path do not maintain the car with the taken air filter!

10. Carefully wipe internal surfaces of the case and an air cleaner cover.
11. Fill in an air cleaner casing a new filtering element. Establish and fix clamps an assemblage cover.
12. Establish air cleaner assemblage on the regular place, screw and tighten fixing bolts.
13. Connect an air inlet sleeve.
14. Connect the electromagnetic valve.
15. Connect electroconducting to the gauge of measurement of an air stream.
16. Connect a negative wire to the battery.