Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
- Manual transmission
   + 5-step manual box of a gear change (РКПП)
   + Automatic transmissions (АТ)
   - Distributing box
      The general information
      Replacement of a back epiploon of a distributing box
      Removal and installation of the lever of a distributing box
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Replacement of a back epiploon of a distributing box

Details of installation of a back epiploon of a distributing box

1 — the Gate of release of air
2 — the Arm of a support of a suspension bracket of a box (only models with the blocked differential)
3 — the Dustproof casing

4 — the Epiploon
5 — the Casing of lengthening of a box


Removal

 PERFORMANCE ORDER

1. Details of installation of a back epiploon of a distributing box are shown on an illustration.
2. Поддомкратьте the car also establish it on props.
3. Disconnect from a distributing box карданный a shaft. Get under a back part картера a distributing box drain capacity.
4. Accurately having hooked a screw-driver with the blunted flat sting, take an old epiploon from the landing nest in a dustproof casing.


Installation

 PERFORMANCE ORDER

1. Accurately plant an epiploon in a dustproof casing, - in quality оправки at planting of a new epiploon the face head of the corresponding size, or a piece of a pipe of suitable diameter can be used.

2. Connect to a distributing box карданный a shaft.
3. Lower the car on the earth and check up level трансмиссионного oils in a distributing box (see the Head of Adjustment and routine maintenance).