Mitsubishi Galant

1. Having turned out fixing screws or bolts, disconnect an emphasis of a door of a back.
2. Disconnect a tube of a washer of back glass.
3. Disconnect corresponding electroconducting.
4. Close a door of a back and from car salon release nuts of fastening of loopy laths.
5. By means of the assistant cautiously remove door assemblage.

1. Establish a door on the regular place and by hand tighten loopy nuts.
2. Establish a door emphasis.
3. Close a door and check up correctness of its position in кузовном an aperture. In case of need correct in appropriate way loopy laths, then tighten fixture with demanded effort (15 H•м).
4. Restore initial connection of electroconducting.
5. Connect a tube of giving of a liquid of washing of back glass, - track reliability of fixing of a tube on the union.
6. Check up serviceability of operation of a latch of the lock. In case of need release fixture and in appropriate way correct position of the drummer.
7. Check up density of closing of a door, in case of need twist in appropriate way a rubber emphasis.

1. Details of installation of a door of a back on models the Versatile person (Wagon) are shown on an illustration.
2. Remove a door emphasis.
3. Disconnect a tube of giving of a liquid of washing of back glass.
4. Disconnect corresponding electroconducting.
5. Ask to adhere the assistant a door and give fastening nuts to a doorframe of loopy laths.
6. Remove a door from the car.

1. Installation is made upside-down. Track, that fixing nuts have been tightened with demanded effort (14 H•м).
2. Check up correctness of placing of a door in кузовном an aperture. In case of need release nuts of fastening of loopy laths and make corresponding updating.
3. Check up serviceability of functioning of a latch of the lock. In case of need adjust position of the drummer.