Mitsubishi Galant

2. In deterioration or damage of components of a suspension bracket or a steering drive can specify also such symptoms, as excessive rocking of the car at movement on rough road or during fulfilment of turns, steering wheel jammings, etc.
3. For an estimation of a condition of shock-absorbers press downwards one of car corners. At отпускании a corner the body should come back in a starting position, making no more than one-two fluctuations. Listen to a scratch and the other extraneous noise published by a suspension bracket at oscillatory movements of a body. The Head the Suspension bracket and a steering more in detail see. Excessive quantity раскачиваний bodies at отпускании a corner, no less than refusal of its return to a starting position, testify to necessity of replacement of shock-absorbers. Operating in a similar manner, serially check up each of four shock-absorbers.

1. Поддомкратьте the car also establish it on props.
2. Check up protectors of wheels on presence of traces of non-uniform deterioration (the Section Check of a condition of tyres see and pressure of their rating), estimate pressure of a rating of tyres.
3. Estimate a condition карданных hinges of a steering column. Check up protective covers of the steering mechanism and power shafts on presence of signs of leaks of greasing. Check up reliability of planting of tips of steering draughts. Check up a condition of components and reliability of a tightening of their fixture. Estimate degree of deterioration of rubber components of a suspension bracket and a steering drive. Ask the assistant повращать a steering wheel and visually estimate size люфта a steering drive. Try to establish the reason of a taking place weak point, make necessary regenerative repair, or replace defective components.

4. Manually rotating forward wheels, try to define on hearing a condition of wheel bearings, make sure of absence люфта at rotation of wheels. Grasp a wheel in points on 12 and at 6 o'clock and pull it in an axial plane, - presence some an appreciable free course testifies to easing of a pretightness of wheel bearings. In case of need disassemble naves for a visual estimation of a condition of bearings and stuffing by their fresh greasing. The full information on a design ступичных assemblages and wheel bearings all-wheel drive models is resulted in the Head the Suspension bracket and a steering.

5. Hooking components mount, estimate a condition of bearings of assemblages of rotary fists. In case of revealing люфта it is necessary to subject bearings to more detailed studying, to make replacement or stuffing by their fresh greasing.
6. Estimate degree of deterioration of universal hinges and sliding муфт карданных shaft (Coupling and transmission a line see the Head).
7. Examine surfaces картеров differential and a distributing box on presence of signs of development of leaks.