1. Make on the car short (in about 15 minutes) a trip for an oil warming up in differential. Поддомкратьте the car also establish it on props. 2. Get under differential drain capacity of suitable volume.
|
3. Turn out at first jellied/control, then drain stoppers from the bottom part картера differential and merge oil in the prepared container. |
4. After вытекание oils will stop, feel a drain stopper on presence подлипших to it of metal sawdust, then wipe it, screw into place and tighten with demanded effort (32 Nanometers).
|
Presence on a stopper of sawdust testifies to deterioration of internal components of the assemblage which condition should be checked up at the first possibility. |
5. By means of the manual pump, a syringe or a funnel fill in differential through a jellied/control aperture necessary quantity of fresh oil of a demanded grade, - oil level should reach the bottom cut of an aperture. 6. Screw a jellied/control stopper into place and tighten it with demanded effort (32 Nanometers). Lower the car on the earth. 7. Make on the car a short trip after which once again check up greasing level in differential. |