Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Electric sockets - the general data
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns/alarm systems
   Removal and installation подрулевых the combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of a direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and a problem diagnostics
   System of additional safety (SRS) - the general information and safety measures
   Removal and radio tape recorder/CD-player installation
   Removal and CD-changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections





Removal and installation of block headlights of tight type

Models of cars considered in the present Management are equipped by system of additional safety (SRS). Before to start performance of any works near to the block of a pillow of safety, a steering column or the instrument panel, disconnect SRS in order to avoid reception of traumas at its casual operation (the Section System of additional safety (SRS) - the general information and safety measures see). Electroconducting of chain SRS is easy for distinguishing on yellow colour of isolation.


Removal

 PERFORMANCE ORDER

1. By means of the switch translate headlights in the lifted position.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Release fixing screws and remove the top and bottom sections of facing of a block headlight.
4. Turn out screws and remove a ring of fastening of a block headlight.
5. Partially liberate a block headlight from кузовной panels and disconnect from it electroconducting.
6. Remove a block headlight from the car.


Installation

 PERFORMANCE ORDER

1. Connect to a headlight electroconducting.
2. Establish a block headlight on the regular place and fix its fixing a ring and screws.
3. Establish sections of facing of assemblage. Screw and tighten fixing screws.