Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
- Options and routine maintenance
   The schedule of routine maintenance of cars Mitsubishi Galant/Mirage/Diamante
   Specifications
   The general data on options and adjustments
   Check of levels of liquids
   Check of a condition of tyres and pressure of their rating
   Replacement of impellent oil and the oil filter
   Check, service and gymnastics of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement ATF of automatic transmission and differential of the main transfer, check of a condition and filter AT service
   Check of a condition of brake lines
   Check of a condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of backlashes of valves - only Mirage
   Replacement of a filtering element of an air cleaner
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation картера (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement приводных belts
   Check of a condition of components of system of release of the fulfilled gases
   Replacement трансмиссионного oils РКПП
   Replacement of greasing of a distributing box - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check of a condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of a lay brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of the power supply system
   Check of a condition and replacement of a belt (it) of drive ГРМ
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check and replacement of the valve of system of operated ventilation картера (PCV)

* Composers of the present Management recommend to make check of a condition of valve PCV through each 24 000 km of run!

 PERFORMANCE ORDER

The principle of functioning of system PCV is in detail stated in the Head of the Control system by the engine.

1. System PCV provides a conclusion картерных gases through the special valve on a hose back in the inlet pipeline, whence they arrive in chambers of combustion and are burnt out during normal functioning of the engine. Besides the valve into system structure enter a hose conducting from a cover of a head of cylinders to the inlet pipeline and a hose of giving of fresh air from an air cleaner under a cover клапанного of the mechanism. Valve PCV with the hose connected to it is planted in a cover of a head of cylinders.

2. At working on single turns, прогретом to normal working temperature the engine pull upwards the valve and take it together with the connected hose from the landing nest in a cover of a head of cylinders.

3. Press a finger to an aperture in valve PCV - depression should be felt, otherwise make sure of passableness of a hose, the union on the inlet pipeline and actually the valve. Replace defective components.
4. Muffle the engine and shake the valve, - in a serviceable condition in the last the easy crash should be heard. If any sounds it is not audible, replace the valve.

5. For valve replacement disconnect it from a hose, - try to remember, how connection has been organised.

6. At purchase of the new valve track that he answered on the standard size to the engine of your car. Will be most correct directly to compare the new valve to the old removed from the engine.
7. Connect the new valve to a hose.

8. Check up serviceability of a condition of a rubber hose and the plug through passage. Defective components replace.

9. Strongly plant the valve on the regular place in a cover of a head of cylinders.