|
1. Make on the car short (in about 15 minutes) a trip for an oil warming up in a distributing box, - whenever possible include an all-wheel drive mode, try to banish the car on all possible high-speed modes, including movement by a backing.
2. Поддомкратьте the car also establish it on props.
3. Get under a distributing box drain capacity of suitable volume.
|
|
4. Turn out at first jellied, then drain stoppers картера a distributing box and merge oil in the prepared container. |
5. After вытекание oils will stop, wipe a drain stopper, screw it into place and tighten with demanded effort (32 Nanometers).
6. Чрез a jellied/control aperture add in a box necessary quantity of fresh oil of a demanded grade, - oil should start to follow too much apertures.
7. Screw a stopper into place and tighten with demanded effort (32 Nanometers). Lower the car on the earth.
8. Make on the car a short trip after which once again check up greasing level in a distributing box. |