Mitsubishi Galant

1. For refuelling of system of cooling the mix of antifreeze made in due proportions on base этиленгликоля with soft water is usually used. The mix should show stability to freezing at temperatures to - 30°С, and if necessary and more low, depending on a climatic belt of an arrangement of region of operation of the car. Except frost resistance, antifreeze gives mixes anticorrosive properties and raises a point of its boiling.
2. Опорожнение and washing of system of cooling should be made according to the schedule of routine maintenance of the car (see the Head of Adjustment and routine maintenance). Use of a cooling liquid during longer term is fraught a various sort with system damages, development of corrosion and a scaling. If water water in region where the car is maintained, is "rigid", i.e. differs the raised maintenance of mineral salts, for formation of a cooling liquid it is necessary to use the distilled or rain water.
3. Before to add cooling liquid in system, check up reliability of fastening of hoses of last on the unions - antifreeze possesses high fluidity and is capable to give leaks through the slightest thinnesses. During normal operation of the engine the cooling liquid is not spent, therefore appreciable falling of its level is a sign of development of the external leaks which reason should be immediately found out and eliminated.
4. The exact structure of a cooling liquid is defined by concrete climatic conditions. Thus the antifreeze maintenance in a mix should not be below 50 % and rise above 70 % - address to a card of structure of a cooling liquid which is usually put on a container label. Ареометры for definition of relative density (density) of a cooling liquid it is possible to get practically in any shop of automobile accessories. Try to use only recommended by manufacturers of the car of a grade of antifreeze (Specifications see).