Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission a line
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of racks and screw springs of a forward suspension bracket
   Regenerative repair of rack-mount assemblages of a forward suspension bracket
   Check of a condition of the top spherical support of a forward suspension bracket (model Galant 1994 - 1998 of вып.)
   Removal and installation of the top levers of a forward suspension bracket (model Galant 1994 - 1998 of вып.)
   Check of a condition of the bottom spherical support of a forward suspension bracket
   Removal and installation of the bottom levers of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of rotary fists and assemblages of naves from wheel bearings (a forward suspension bracket)
   Removal and installation of back racks
   Regenerative repair of rack-mount assemblages of a back suspension bracket
   Removal and installation of the top operating levers of a back suspension bracket
   Removal and installation of the bottom operating levers of a back suspension bracket
   Removal and installation of longitudinal levers of a back suspension bracket
   Removal and installation of the back stabilizer of cross-section stability
   Adjustment of wheel bearings
   Removal and installation ступичных assemblages
   Removal and steering wheel installation
   Removal and installation подрулевого the combined switch
   Removal and installation of the switch of management by functioning of screen wipers
   Removal and installation of the cylinder of the lock of ignition
   Removal and installation of the switch of ignition
   Removal and installation of draughts of a steering drive
   Replacement of protective covers of assemblage of the steering mechanism
   Removal and installation of the steering mechanism from a manual drive
   Removal and installation of the hydrostrengthened steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Removal and installation of wheel hairpins
   Wheels and tyres - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment




Removal and installation of racks and screw springs of a forward suspension bracket

Details of installation of a rack of a forward suspension bracket on models Mirage

1 — the Clamp of fastening of a brake hose
2 — the Wheel gauge (models with ABS)
3 — the Bolt of fastening of the bottom support (2 шт)

4 — Самоконтрящаяся a nut
5 — Rack-mount assemblage
N — Replace


Models Diamante and Galant on 1993 and since 1999 of вып.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Поддомкратьте the car also establish it on props. Remove a corresponding wheel.
3. Remove from a rack a basic arm of a brake line, - do not hook a fixing collar any tools!
4. On the models equipped ABS, release a clamp of fastening of the wheel gauge on rack-mount assemblage.
5. Prop up a jack the bottom lever of a suspension bracket and give bolts of fastening of rack-mount assemblage to a rotary fist. Tie up a rotary fist to suspension bracket elements so that not to admit a tension of a brake hose.
6. On models with an active suspension bracket (Active-ECS) release a nut of fastening of an air-line to the top part of a rack. Disconnect a line and remove a sealing ring, then turn out fixing and remove from a rack system Active-ECS actuation mechanism, - do not forget to disconnect electroconducting.
7. Mark position of the top support of a rack concerning a body, then release fixing nuts and remove rack-mount assemblage from the car.


Installation

 PERFORMANCE ORDER

1. Establish rack-mount assemblage on the regular place (track correctness of combination of the landing labels put in the course of dismantle), screw the top fixing nuts and tighten them with demanded effort (45 H•м).
2. Level a rack and connect it to assemblage of a rotary fist, having tightened fixing bolts with demanded effort (90 ÷ 105 H•м).
3. On models with an active suspension bracket restore initial connection of an air-line (do not forget to replace a sealing ring) and establish into place actuation mechanism Active-ECS, - do not forget to connect electroconducting.
4. Establish into place a basic arm with a brake hose. On models with ABS establish the wheel gauge.
5. Establish a wheel and lower the car on the earth.
6. In summary execute adjustment of corners of installation of forward wheels.


Models Mirage

Removal

 PERFORMANCE ORDER

1. Details of installation of rack-mount assemblage on models Mirage are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Поддомкратьте the car also establish it on props. Remove a corresponding wheel.
4. On the models equipped ABS, release a clamp of fastening of the wheel gauge on rack-mount assemblage.
5. Prop up a jack the bottom lever of a suspension bracket and give bolts of fastening of rack-mount assemblage to a rotary fist.
6. Mark position of the top support of a rack concerning a body, then turn out fixing bolts and remove rack-mount assemblage from the car.


Installation

 PERFORMANCE ORDER

1. Establish rack-mount assemblage on the regular place (track correctness of combination of the landing labels put in the course of dismantle), screw the top fixing nuts and tighten them with demanded effort (40 H•м).
2. Level a rack and connect it to assemblage of a rotary fist, having tightened fixing bolts with demanded effort (110 ÷ 130 H•м).
3. Establish into place a basic arm with a brake hose. On models with ABS establish the wheel gauge.
4. Establish a wheel and lower the car on the earth.
5. In summary execute adjustment of corners of installation of forward wheels.


Models Galant 1994 ÷ 1998 вып.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Поддомкратьте the car also establish it on props. Remove a corresponding wheel.
3. Disconnect a rack of the stabilizer of cross-section stability from демпферной plugs.
4. Turn out bottom through and top coupling bolts and remove assemblage демпферной plugs.

5. Give nuts of fastening of the top support and remove assemblage of the shock-absorber with a screw spring from the car.


Installation

 PERFORMANCE ORDER

1. Establish the top support of the shock-absorber, - track correctness of an arrangement of three fixing bolts.
2. Establish the rubber plug of the top support, impose a washer, screw a counternut and tighten it with demanded effort (24 H•м).
3. Establish the shock-absorber and tighten the top nuts of its fastening with demanded effort (44 H•м).
4. Level демпферную a plug, establish the bottom through bolt of its fastening and tighten its nut with effort 88 H•м. The top coupling bolt tighten with effort 103 H•м.
5. Connect to демпферной to a plug a rack of the stabilizer of cross-section stability and tighten a nut of its fastening with demanded effort (39 H•м).
6. Establish a wheel and lower the car on the earth.
7. In summary execute adjustment of corners of installation of forward wheels.