Mitsubishi Galant

1990-2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission a line
- Brake system
   Specifications
   Replacement of the gauge-switch of stoplights
   Removal and installation ГТЦ
   Adjustment of a pedal of a foot brake
   Check of serviceability of functioning/tightness, removal and installation of the vacuum amplifier of brakes
   Removal and valve-regulator installation
   Removal and installation of brake lines
   Prorolling of brake system
   Disk brake mechanisms - the general information
   Estimation of a condition brake колодок
   Replacement колодок disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Regenerative repair of a support of the disk brake mechanism
   Removal, check of a condition and installation of a brake disk
   Drum-type brake mechanisms - the general information
   Removal, installation and check of a condition of a brake drum
   Check of a condition of brake boots
   Removal and installation of brake boots
   Adjustment of drum-type brake mechanisms
   Removal, regenerative repair and installation of wheel cylinders
   Removal and cable installation (ов) a drive of a lay brake
   Adjustment of a lay brake
   Removal and installation of frictional boots of a lay brake (model with disk brake mechanisms of back wheels)
   System of antiblocking of brakes (ABS) - the general information, a problem diagnostics and codes of malfunctions
   Removal and installation of the hydraulic modulator
   Removal and installation of the block of management ABS
   Removal and installation of wheel gauges
   Removal and installation of gauges of accelerations (G-gauges)
   Replacement of rotors of wheel gauges
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of frictional boots of a lay brake (model with disk brake mechanisms of back wheels)

Components of a drive of a lay brake on models Galant since 1994 вып. With disk brake mechanisms of back wheels

1 — the Support of the brake mechanism
2 — the Brake disk
3 — Анкерная a spring of a back boot
4 — Анкерная a spring of a forward boot
5 — the Spring of an adjusting castor
6 — the Regulator
7 — Распорная a lath

8 — the Returnable spring распорной laths
9 — the Plate of a directing spring
10 — the Directing spring of a boot
11 — Анкерный a finger
12 — Frictional boots
13 — the Clamp
14 — Тросовый a drive of a lay brake


Components of a drive of a lay brake on models Diamante 1992 ÷ 1996 of вып.

1 — the Wheel gauge (models with ABS)
2 — the Support of the brake mechanism
3 — the Brake disk
4 — the Spring of an adjusting castor
5 — the Plate of a directing spring
6 — the Directing spring of a boot
7 — Анкерный a finger
8 — the Regulator
9 — Анкерная a spring of a back boot
10 — Анкерная a spring of a forward boot

11 — Распорная a lath
12 — the Returnable spring распорной laths
13 — Frictional boots
14 — the Clamp
15 — the Protective cover ступичной nuts
16 — Ступичная a nut
17 — the Washer
18 — the Wheel bearing
19 — the Brake board


Components of a lay brake on models Diamante since 1997 вып.

1 — the Bolt of fastening of a support
2 — the Support
3 — the Brake disk
4 — the Wheel gauge
5 — fastening Bolts ступичной assemblages
6 — Ступичная assemblage
7 — the Screw of a directing spring of a frictional boot
8 — the Directing spring of a boot

9 — the Frictional boot
10 — the Antispray screen
11 — a fastening Tip приводного a cable to the executive lever
12 — the Brake board
13 — the Adjusting castor
14 — the Cam
15 — the Pusher
16 — the Executive lever


Models Galant since 1994 вып. And Diamante 1992 ÷ 1996 of вып.

Removal

 PERFORMANCE ORDER

1. Components of a drive of a lay brake on corresponding models are presented on illustrations.
2. Поддомкратьте the car also establish it on props.
3. Remove assemblage of a brake support (see Has undressed Removal and installation of supports of disk brake mechanisms).
4. Remove a brake disk (see Has undressed Removal, check of a condition and installation of a brake disk).

5. Remove анкерные springs of forward and back frictional boots.

6. Remove a spring of an adjusting castor and regulator assemblage.
7. Remove распорную a lath with a returnable spring.
8. Remove directing springs and анкерные fingers of frictional boots.
9. Remove башмачные assemblages.
10. Release clamps, turn out fixing bolts and remove a cable of a drive of a lay brake.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Track correctness of installation анкерных springs, - they have various power characteristics and one of them is marked by a paint.


Models Diamante since 1997 вып.

Removal

 PERFORMANCE ORDER

1. A design of a lay brake on models Diamante since 1997 вып. It is presented on an illustration.
2. Поддомкратьте the car also establish it on props.
3. Remove a support (see Has undressed Removal and installation of supports of disk brake mechanisms).
4. Remove a brake disk (see Has undressed Removal, check of a condition and installation of a brake disk).
5. Turn out screws of directing springs and remove башмачные assemblages from a brake board.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.