Mitsubishi Galant

1. Replacement ATF should be made on a regular basis, according to the schedule of routine maintenance of the car (see Has undressed the Schedule of routine maintenance of cars Mitsubishi Galant/Mirage/Diamante). Before to start procedure performance, warm up transmission, having made on the car short (about 20-minute) a trip.
2. Prepare fresh трансмиссионную a liquid of a corresponding grade (Specifications in the beginning of the Head see).
3. Number other necessary for performance of forthcoming procedure of tools and materials concern: тележечный a jack, props for car fixing in the lifted position, drain capacity in volume not less than 7 ч 10 l (depending on car model, - see Спецификаци) and a stock of rags and old newspapers.
4. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided an easy approach to a drain stopper of the pallet картера transmissions.

5. Get under the pallet картера transmissions drain capacity and all necessary stock. Try not to touch to located under with the car bottom разогретым to components of the power unit and system of release of the fulfilled gases. Having placed properly reception container, turn out a drain stopper, - in order to avoid a rounding off шлицов heads take advantage for отдавания stoppers накидным of a key. When вытекание liquids completely will stop, wipe a drain stopper, screw it on the regular place and tighten with demanded effort (30 ч 35 Nanometers). Check up a condition of the merged liquid. If merged ATF has dark (brown or black) colour, the transparency has lost or smells as ashes, it is necessary to address to experts of car-care centre for the purpose of performance of check of a condition and necessary regenerative repair of internal components АТ!

6. The drain stopper of differential of the main transfer also is located in the bottom part картера transmissions. Move in appropriate way drain capacity, turn out a stopper with the help накидного a key and lower a liquid from differential assemblage. When вытекание liquids completely will stop, wipe a drain stopper, screw it on the regular place and tighten with demanded effort (30 ч 35 Nanometers). With the same effort tighten a drain stopper of differential.

7. Lower the car on the earth and through directing tube measuring щупа (take advantage of a funnel with a long nouse) fill in in transmission ATF of a demanded grade, having finished its level to a corresponding mark on measuring щупе (the Section Check of levels of liquids see).
8. Translate transmission in position “Р”, cock a lay brake and, having squeezed out a pedal of a foot brake, start the engine.
9. Keeping a brake pedal pressed, within nearby 5 minutes serially translate selector AT lever through all positions, in summary having returned it in position “Р”. Not suppressing the engine, check up level ATF, in case of need make corresponding updating, having finished level of a liquid to a correct mark in an edge measuring щупа (add a liquid in the small portions, each time checking its level).
10. Within first several days of operation of the car look under the car, checking transmission on presence of signs of development of leaks. Once again check up level ATF, in case of need make updating (the Section Check of levels of liquids see).

1. Lift the car over the earth and merge ATF from картера АТ (see above).

2. Having got drain capacity under the pallet картера transmissions, turn out located on perimetre of the last fixing bolts.

3. In case of need обстучав the pallet to perimetre a hammer with soft brisk (in order to avoid damage of interfaced surfaces do not try to hook the pallet the lever), cautiously separate it from картера transmissions.

4. Merge a liquid remaining in the pallet in reception container.
5. Turn out fixing screws and remove filter ATF from the case клапанной assemblages.

6. Carefully examine internal surfaces of the pallet, estimate a condition of a filtering element and merged ATF. In the course of use transmission the liquid can change originally bright red colour on dark red and even brown, and also get ashes smell, - such changes usually testify transmission overheats while in service the car. At detection in a liquid, the pallet or the filter of metal sawdust, or particles of a frictional material it is necessary to check up a condition of internal components АТ or the rotation converter. In case of absence of confidence at definition of a condition of a liquid or the filter, address to experts of car-care centre.
7. Wash out the pallet solvent and, whenever possible, dry its compressed air. A scraper remove from interfaced surfaces of the pallet, картера and cases клапанной assemblages traces of a material of an old lining.

Try not to damage an interfaced surface of the case made of an easy aluminium alloy клапанной assemblages. Establish new filter ATF and tighten bolts of its fastening with demanded effort (7 H•м).

8. Carefully wipe the rags moistened in acetone interfaced surfaces of the pallet and картера АТ, establish a new lining, press the pallet to картеру, screw fixing bolts and in stages in regular intervals tighten them with demanded effort (10 ч 12 H•м).
9. Fill in in transmission fresh ATF.