Mitsubishi Galant

1990-2001 of release

Repair and car operation

Mitsubishi Galant
+ Identification numbers of the car
+ Controls
+ Options and routine maintenance
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Control systems of the engine
- Manual transmission
   - 5-step manual box of a gear change (РКПП)
      The general information
      Adjustment of a drive of a gear change
      Removal and installation of the gauge-switch of fires of a backing
      Removal and transmission installation
      Major repairs РКПП
   + Automatic transmissions (АТ)
   + Distributing box
+ Coupling and transmission a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the gauge-switch of fires of a backing


1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Remove the components blocking access to the gauge-switch of fires of a backing.
3. Disconnect from the gauge-switch electroconducting.
4. By means of a suitable face head with a drive turn out the gauge from картера transmissions.
5. Installation is made upside-down. The demanded effort of a tightening of the gauge-switch makes 30 35 H•м.