Mitsubishi Galant

1. Details of installation of door rear-view mirrors are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

3. Remove the internal triangular decorative panel.
4. On models with a manual drive of adjustment of position of a mirror turn out the adjusting screw and remove the regulator handle.
5. On models with электроприводными mirrors disconnect corresponding electroconducting.
6. Give fixing nuts and remove a basic arm of door furnish.
7. Remove a mirror from the car.

1. Establish a mirror on the regular place.
2. Establish an arm of furnish and screw fixing nuts.
3. Depending on a drive design restore initial connection of electroconducting, or establish the regulator handle.
4. Establish the triangular decorative panel.
5. Connect a negative wire to the battery.
6. At a corresponding complete set check up serviceability of functioning of the electric drive of a mirror.